Management of Bone Loss in Posterior Glenohumeral Shoulder Instability: Current Concepts.

¼ Posterior glenohumeral instability is relatively uncommon compared with anterior instability, but is becoming an increasingly recognized and surgically managed shoulder pathology.¼ Soft-tissue stabilization alone may not be sufficient in patients who present with substantial bone loss to the posterior glenoid and/or the anterior humeral head.¼ For posterior glenoid defects, posterior glenoid osteoarticular augmentation can be used, and posterior glenoid opening wedge osteotomy can be considered in cases of posterior instability with pathologic retroversion.¼ For humeral head lesions, several surgical treatment options are available including subscapularis transposition into the humeral head defect, autograft or allograft reconstruction, humeral rotation osteotomy, and shoulder arthroplasty.

[Anterior shoulder dislocation: revised Dutch Clinical Guideline in practice]. / Primaire anterieure schouderluxatie.

Shoulder dislocations remain the most frequent of joint dislocations, with anterior displacement of the humeral head being the direction of dislocation seen most often (97%). Recently, the Dutch clinical guideline on shoulder dislocations has been revised on the basis of predetermined bottlenecks in clinical practice. In this paper, the guideline is translated to clinical practice by means of two fictional cases, in which the novel recommendations are incorporated. The following topics were systematically assessed based on the best available scientific evidence: primary diagnostics, reduction techniques, painmedication/ sedation surrounding reduction and the need for physiotherapy, stabilization surgery and immobilization. Also, a best practice care pathway is advocated. Since scientific evidence is often inconclusive to provide undebatable therapeutic rules, the committee graded the available evidence and additionally used expert opinion to carefully draft recommendations. The paper concludes with an overview of all the recommendations stated in the updated multidisciplinary guideline.

Psychometric properties of the Disability of Arm Shoulder and Hand (DASH) in subjects with frozen shoulder: a reliability and validity study.

BACKGROUND: Frozen Shoulder (FS) is a painful condition characterized by severe pain and progressive restriction of shoulder movement, leading to functional impairment and reduced quality of life. While different Patient Reported Outcome Measurements (PROMs) tools exist for assessing shoulder diseases, few specific PROMs are validated for FS patients. PURPOSE: This study aims to assess the psychometric properties of the Disability of Arm, Shoulder, and Hand (DASH) questionnaire in FS patients. METHODS: One hundred and twenty-four subjects (mean ± SD age = 55.4 ± 7.9 years; 55.6% female) diagnosed with FS were included and completed the DASH questionnaire, the Numerical Pain Rating Scale (NPRS), the Shoulder Pain and Disability Index (SPADI), and the Short-Form Health Survey 36 (SF-36). Floor or ceiling effects were investigated. Structural validity was analysed through a unidimensional Confirmatory Factor Analysis (CFA), internal consistency through Cronbach's alpha, test-retest reliability through the Intraclass Correlation coefficient (ICC), measurement error through the Standard Error of Measurement (SEM), and the Minimum Detectable Change (MDC), and construct validity through the hypothesis testing with the correlation with the other outcome measures used. RESULTS: No floor or ceiling effects were observed. CFA confirmed a one-factor structure after addressing local item dependency (Root Mean Square Error of Approximation = 0.055; Standardized Root Mean Square Residual = 0.077; Comparative Fit Index = 0.970; Tucker-Lewis Index = 0.968). Cronbach's alpha was high (= 0.951), and test-retest reliability was excellent (ICC = 0.999; 95% CI: 0.998-1.000). SEM was equal to 0.5 points, and MDC to 1.5 points. Construct validity was considered satisfactory as 80% of the a-priori hypotheses were met. CONCLUSION: The DASH questionnaire demonstrated good psychometric properties in FS patients, supporting its use as a valuable tool for assessing the impact of FS in clinical and research settings.

Sporadic Malignant Triton Tumor of Shoulder: a Case Report.

Background: Malignant triton tumors (MTT) are subtype of malignant peripheral nerve sheath tumor (MPNST) which develop from Schwan cells of peripheral nerves or within neurofibromas, and shows rhabdomyoblastic differentiation. It is a rare soft tissue tumor with poor prognosis. Objective: We report a case of Malignant Triton Tumor (MTT) arising in the right shoulder in a 46 year old male patient presented to our Musculoskeletal Oncology Clinic at Royal Rehabilitation center at King Hussein Medical Center during June 2018. Case presentation: The patient was complaining of an 8 months long progressive right shoulder pain and swelling at the posterior lateral area of the shoulder. As accurate diagnosis is crucial in such case, investigations that included x-rays and magnetic resonance imaging (MRI) demonstrated an soft tissue tumor involving the right shoulder area leading to the differential diagnosis of aggressive soft tissue tumor which laid down the plan of an open incisional biopsy to be reported histopathological as a case of Malignant Triton Tumor which is a very rare and aggressive sarcoma originates from the peripheral nerve sheaths as it is subtype of malignant peripheral nerve sheath tumors after which excision of the entire tumor with safety margin was performed and referred for adjuvant chemotherapy. Conclusion: The treatment of choice is radical tumor excision with wide margins followed by chemotherapy and /or radiotherapy to improve the 5 years survival rates.

Scapula fractures: functional anatomy, clinical assessment and management.

Fractures of the scapula are rare injuries, accounting for 3-5% of all shoulder girdle fractures. They are frequently the result of high energy trauma and often present with concurrent and life-threatening injuries to adjacent structures, leading to significant morbidity and mortality. Patients presenting with scapula fractures must receive a thorough and systematic clinical assessment as directed by national trauma guidelines. Appropriate imaging is essential in delineating fracture morphology and should at the very least include anteroposterior, anteroposterior oblique (Grashey) and axillary or scapula 'Y' view of the shoulder. Computed tomography imaging with three-dimensional reconstruction allows better delineation of the fracture morphology and helps with surgical planning. A lack of randomised controlled trials comparing the efficacy of conservative and operative management of scapula fractures has resulted in limited consensus for surgical indications. Nevertheless, most extra-articular fractures can be managed conservatively while intra-articular fractures of the glenoid frequently require surgical fixation.

[Research progress of ultrasound in diagnosis and treatment of shoulder joint diseases].

Objective: To review the research progress of ultrasound in the diagnosis and treatment of shoulder diseases, in order to provide a theoretical basis for the further development of ultrasound in shoulder surgery. Methods: The recent literature on the application of ultrasound in the shoulder joint was extensively reviewed. The application of ultrasound in the diagnosis and treatment of shoulder joint diseases, and the advantages and disadvantages of ultrasound were analysed, and the development trend of ultrasound technology in the shoulder joint area was prospected. Results: At present, the diagnosis of shoulder joint diseases mainly relies on MRI, however, with the development of ultrasound technology, ultrasound with the characteristics of convenient, reliable, and real-time dynamic evaluation is more and more recognized in the diagnosis process of shoulder joint diseases, combined with three-dimensional ultrasound, ultrasound intervention, and elastography can improve the accuracy, sensitivity, and specificity of the diagnosis, and is suitable for the diagnosis and treatment of various shoulder joint diseases, which is expected to carry out early prevention of shoulder joint diseases in the future and achieve more refined and minimally invasive treatment. Conclusion: Ultrasound technology has wide application prospect in shoulder joint diseases, but it is still in the developing stage, and the subjective dependence needs to be solved further.

Role of Critical Shoulder Angle in Degenerative Type Rotator Cuff Tears: A Turkish Cohort Study.

BACKGROUND This retrospective study investigated the association between the critical shoulder angle (CSA) and the development of full-thickness rotator cuff tears (FTRCTs) in the Turkish population. The CSA is an imaging parameter that quantifies the relationship between the inclination of the glenoid and the lateral extension of the acromion in the coronal plane. The CSA is an anatomical measurement, and higher CSA values have been associated with an increased incidence of FTRCTs. However, there is a lack of data on CSA regarding the Turkish population. MATERIAL AND METHODS In this study, CSA measurements were recorded in 2 groups: 50 patients with FTRCT who had arthroscopic repair (group 1) and 50 age- and sex-matched individuals with no FTRCT detected by magnetic resonance imaging (group 2). Sex, age, affected side, dominant side, and smoking status were recorded for each patient. The CSA measurements of the affected sides were performed on true anterior-posterior view radiographs. RESULTS The results showed a statistically significant difference between the mean CSA values of group 1 (37.48°) and group 2 (33.53°), P<0.001. CSA values of 36 and above had a sensitivity of 73.58%, specificity of 74.47%, positive predictive value of 75%, and negative predictive value of 74.47% for detecting FTRCT. CONCLUSIONS CSA measurement on radiographs is a useful diagnostic tool in the Turkish population, and an above-average CSA value is associated with a significantly increased incidence of degenerative-type FTRCT.

Biomechanical Characteristics of Glenosphere Orientation Based on Tilting Angle and Overhang Changes in Reverse Shoulder Arthroplasty.

Background: Glenoid position and inclination are important factors in protecting against scapular notching, which is the most common complication that directly affects the longevity of reverse shoulder arthroplasty (RSA). This study aimed to investigate the biomechanical characteristics of glenosphere orientation, comparing neutral tilt, inferior overhang with an eccentric glenosphere at the same placement of baseplate, and inferior tilt after 10° inferior reaming in the lower part of the glenoid in RSA. Methods: Nine cadaveric shoulders were tested with 5 combinations of customized glenoid components: a centric glenosphere was combined with a standard baseplate (group A); an eccentric glenosphere to provide 4-mm inferior overhang than the centric glenosphere was combined with a standard baseplate (group B); a centric glenosphere was combined with a wedge-shaped baseplate tilted inferiorly by 10° with the same center of rotation (group C); an eccentric glenosphere was attached to a wedge-shaped baseplate (group D); and 10° inferior reaming was performed on the lower part of the glenoid to apply 10° inferior tilt, with a centric glenosphere secured to the standard baseplate for simulation of clinical tilt (group E). Impingement-free angles for adduction, abduction, forward flexion, external rotation, and internal rotation were measured. The capability of the deltoid moment arm for abduction and forward flexion, deltoid length, and geometric analysis for adduction engagement were evaluated. Results: Compared with neutral tilt, inferior tilt at the same position showed no significant difference in impingement-free angle, moment arm capability, and deltoid length. However, group D resulted in better biomechanical properties than a central position, regardless of inferior tilt. Group E demonstrated a greater range of adduction, internal and external rotation, and higher abduction and forward flexion capability with distalization, compared to corresponding parameters for inferior tilt with a customized wedge-shaped baseplate. Conclusions: A 10° inferior tilt of the glenosphere, without changing the position of the baseplate, had no benefit in terms of the impingement-free angle and deltoid moment arm. However, an eccentric glenosphere had a significant advantage, regardless of inferior tilt. Inferior tilt through 10° inferior reaming showed better biomechanical results than neutral tilt due to the distalization effect.

Clinical and cost-effectiveness of individualised (early) patient-directed rehabilitation versus standard rehabilitation after surgical repair of the rotator cuff of the shoulder: protocol for a multicentre, randomised controlled trial with integrated Quintet Recruitment Intervention (RaCeR 2).

INTRODUCTION: Despite the high number of operations and surgical advancement, rehabilitation after rotator cuff repair has not progressed for over 20 years. The traditional cautious approach might be contributing to suboptimal outcomes. Our aim is to assess whether individualised (early) patient-directed rehabilitation results in less shoulder pain and disability at 12 weeks after surgical repair of full-thickness tears of the rotator cuff compared with current standard (delayed) rehabilitation. METHODS AND ANALYSIS: The rehabilitation after rotator cuff repair (RaCeR 2) study is a pragmatic multicentre, open-label, randomised controlled trial with internal pilot phase. It has a parallel group design with 1:1 allocation ratio, full health economic evaluation and quintet recruitment intervention. Adults awaiting arthroscopic surgical repair of a full-thickness tear are eligible to participate. On completion of surgery, 638 participants will be randomised. The intervention (individualised early patient-directed rehabilitation) includes advice to the patient to remove their sling as soon as they feel able, gradually begin using their arm as they feel able and a specific exercise programme. Sling removal and movement is progressed by the patient over time according to agreed goals and within their own pain and tolerance. The comparator (standard rehabilitation) includes advice to the patient to wear the sling for at least 4 weeks and only to remove while eating, washing, dressing or performing specific exercises. Progression is according to specific timeframes rather than as the patient feels able. The primary outcome measure is the Shoulder Pain and Disability Index total score at 12-week postrandomisation. The trial timeline is 56 months in total, from September 2022. TRIAL REGISTRATION NUMBER: ISRCTN11499185.

The Influence of Component Design and Positioning on Soft-Tissue Tensioning and Complications in Reverse Total Shoulder Arthroplasty: A Review.

¼ Reverse total shoulder arthroplasty was designed to function in the rotator cuff deficient shoulder by adjusting the glenohumeral center of rotation (COR) to maximize deltoid function.¼ Adjustments in the COR ultimately lead to changes in resting tension of the deltoid and remaining rotator cuff, which can affect implant stability and risk of stress fracture.¼ Soft-tissue balance and complication profiles can be affected by humeral component (version, neck shaft angle, and inlay vs. onlay) and glenoid component (sagittal placement, version, inclination, and lateralization) design and application.¼ A good understanding of the effects on soft-tissue balance and complication profile is critical for surgeons to best provide optimal patient outcomes.

Arthroscopic Surgery Versus Nonoperative Treatment for Calcific Tendinitis of the Shoulder: A Retrospective Cohort Study.

BACKGROUND: Treatment options for calcific tendinitis (CT) of the shoulder remain controversial. A consensus for an operative indication for this condition is lacking. PURPOSE: To compare nonoperative versus operative treatment for shoulder CT and analyze factors affecting the prognosis after treatment. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A total of 180 patients diagnosed with symptomatic CT between January 2017 and September 2021 were evaluated in this retrospective cohort study. There were 103 patients treated nonoperatively at our institution, which included the use of nonsteroidal anti-inflammatory drugs, acupuncture, steroid injections, extracorporeal shock wave therapy, and ultrasound-guided needle aspiration/percutaneous irrigation. However, 77 patients were treated with arthroscopic surgery after 6 months of failed nonoperative treatment. The visual analog scale (VAS) for pain, the Constant-Murley score, and imaging were used to assess and evaluate outcomes. Descriptive data, functional outcomes, and imaging findings were compared between the operative and nonoperative groups before and after propensity score matching. Additionally, prognostic factors including calcium deposit size, tendon infiltration by calcium deposits, involvement of single or multiple tendons, and occurrence of rotator cuff tears were analyzed by comparing the groups to determine their effect on treatment options and recovery. RESULTS: Magnetic resonance imaging showed that the supraspinatus tendon (66.7%) was most commonly involved, followed by the infraspinatus (42.8%) and subscapularis (21.1%) tendons. Tendon infiltration by calcium deposits was observed in 84.4% of the patients, and rotator cuff tears occurred in 30.0% of the patients. After propensity score matching, there was no significant difference in changes in the Constant-Murley score (48.1 ± 25.4 vs 49.0 ± 22.8, respectively; P = .950) and VAS score (4.9 ± 2.3 vs 4.5 ± 1.9, respectively; P = .860) between the operative and nonoperative groups at the final follow-up. However, for patients with shoulder CT and without rotator cuff tears, there was a significant difference in changes in the Constant-Murley score (52.93 ± 25.18 vs 42.13 ± 22.35, respectively; P = .012) and VAS score (5.21 ± 2.06 vs 3.81 ± 1.98, respectively; P < .001) between the operative and nonoperative groups, but the recovery time in the operative group was longer than that in the nonoperative group (86.92 ± 138.56 vs 30.42 ± 54.97 days, respectively; P = .016). The results also showed that calcium deposit size, involvement of multiple tendons, and tendon infiltration by calcium deposits did not affect the recovery time after treatment. The survival analysis showed that rotator cuff tears affected the complete recovery of shoulder function. CONCLUSION: This study demonstrated no significant difference between nonoperative and operative treatment for patients with shoulder CT, on the whole. However, for patients with shoulder CT and without rotator cuff tears, the effect of operative treatment was better than that of nonoperative treatment; yet, operative treatment was shown to prolong the recovery time. Calcium deposit size, tendon infiltration by calcium deposits, and involvement of multiple tendons did not correlate with recovery time or the recovery of function. A rotator cuff tear was the only factor affecting the complete recovery of shoulder function.

A new sports garment with elastomeric technology optimizes physiological, mechanical, and psychological acute responses to pushing upper-limb resistance exercises.

This study aimed to compare the mechanical (lifting velocity and maximum number of repetitions), physiological (muscular activation, lactate, heart rate, and blood pressure), and psychological (rating of perceived exertion) responses to upper-body pushing exercises performed wearing a sports elastomeric garment or a placebo garment. Nineteen physically active young adults randomly completed two training sessions that differed only in the sports garment used (elastomeric technology or placebo). In each session, subjects performed one set of seated shoulder presses and another set of push-ups until muscular failure. The dependent variables were measured immediately after finishing the set of each exercise. Compared to the placebo garment, the elastomeric garment allowed participants to obtain greater muscular activation in the pectoralis major (push-ups: p = 0.04, d = 0.49; seated shoulder press: p < 0.01, d = 0.64), triceps brachialis (push-ups, p < 0.01, d = 0.77; seated shoulder press: p < 0.01, d = 0.65), and anterior deltoid (push-ups: p < 0.01, d = 0.72; seated shoulder press: p < 0.01, d = 0.83) muscles. Similarly, participants performed more repetitions (push-ups: p < 0.01; d = 0.94; seated shoulder press: p = 0.03, d = 0.23), with higher movement velocity (all p ≤ 0.04, all d ≥ 0.47), and lower perceived exertion in the first repetition (push-ups: p < 0.01, d = 0.61; seated shoulder press: p = 0.05; d = 0.76) wearing the elastomeric garment compared to placebo. There were no between-garment differences in most cardiovascular variables (all p ≥ 0.10). Higher diastolic blood pressure was only found after the seated shoulder press wearing the elastomeric garment compared to the placebo (p = 0.04; d = 0.49). Finally, significantly lower blood lactate levels were achieved in the push-ups performed wearing the elastomeric garment (p < 0.01; d = 0.91), but no significant differences were observed in the seated shoulder press (p = 0.08). Overall, the findings of this study suggest that elastomeric technology integrated into a sports garment provides an ergogenic effect on mechanical, physiological, and psychological variables during the execution of pushing upper-limb resistance exercises.

Estimating Rotational Acceleration in Shoulder and Elbow Joints Using a Transformer Algorithm and a Fusion of Biosignals.

In the present study, we used a transformer model and a fusion of biosignals to estimate rotational acceleration in elbow and shoulder joints. To achieve our study objectives, we proposed a mechanomyography (MMG) signal isolation technique based on a variational mode decomposition (VMD) algorithm. Our results show that the VMD algorithm delivered excellent performance in MMG signal extraction compared to the commonly used technique of empirical mode decomposition (EMD). In addition, we found that transformer models delivered estimates of joint acceleration that were more precise than those produced by mainstream time series forecasting models. The average R2 values of transformer are 0.967, 0.968, and 0.935, respectively. Finally, we found that using a fusion of signals resulted in more precise estimation performance compared to using MMG signals alone. The differences between the average R2 values are 0.041, 0.053, and 0.043, respectively. Taken together, the VMD isolation method, the transformer algorithm and the signal fusion technique described in this paper can be seen as supplying a robust framework for estimating rotational acceleration in upper-limb joints. Further study is warranted to examine the effectiveness of this framework in other musculoskeletal contexts.

Variability between Different Hand-Held Dynamometers for Measuring Muscle Strength.

Muscle strength is routinely measured in patients with neuromuscular disorders by hand-held dynamometry incorporating a wireless load cell to evaluate disease severity and therapeutic efficacy, with magnitude of effect often based on normative reference values. While several hand-held dynamometers exist, their interchangeability is unknown which limits the utility of normative data. We investigated the variability between six commercially available dynamometers for measuring the isometric muscle strength of four muscle groups in thirty healthy individuals. Following electro-mechanical sensor calibration against knowns loads, Citec, Nicholas, MicroFET2, and Commander dynamometers were used to assess the strength of ankle dorsiflexors, hip internal rotators, and shoulder external rotators. Citec, Jamar Plus, and Baseline Hydraulic dynamometers were used to capture hand grip strength. Variability between dynamometers was represented as percent differences and statistical significance was calculated with one-way repeated measures ANOVA. Percent differences between dynamometers ranged from 0.2% to 16%. No significant differences were recorded between the Citec, Nicholas, and MicroFET2 dynamometers (p > 0.05). Citec grip strength measures differed to the Jamar Plus and Baseline Hydraulic dynamometers (p < 0.01). However, when controlling for grip circumference, they were comparable (p > 0.05). Several hand-held dynamometers can be used interchangeably to measure upper and lower limb strength, thereby maximising the use of normative reference values.

An Ergonomics Analysis of Archers through Motion Tracking to Prevent Injuries and Improve Performance.

Archery ranks among the sports with a high incidence of upper extremity injuries, particularly affecting the drawing shoulder and elbow, as well as inducing stress on the lower back. This study seeks to bridge the gap by integrating real-time human motion with biomechanical software to enhance the ergonomics of archers. Thirteen participants were involved in four tasks, using different bows with varied draw weights and shooting distances. Through the application of advanced integrative technology, this study highlights the distinct postures adopted by both males and females, which indicate the biomechanical differences between genders. Additionally, an analysis of the correlation between exposed spinal forces and these adopted postures provides insights into injury risk assessment during the key archery movements. The findings of this study have the potential to significantly enhance the application of training methodologies and the design of assistive devices. These improvements are geared towards mitigating injury risks and enhancing the overall performance of archers.

Assessing the Validity of the Ergotex IMU in Joint Angle Measurement: A Comparative Study with Optical Tracking Systems.

An observational, repeated measures design was used in this study to assess the validity of the Ergotex Inertial Measurement Unit (IMU) against a 3D motion capture system for measuring trunk, hip, and shoulder angles in ten healthy adult males (38.8 ± 7.3 y, bodyweight 79.2 ± 115.9 kg, body height 179.1 ± 8.1 cm). There were minimal systematic differences between the devices, with the most significant discrepancy being 1.4 degrees for the 80-degree target angle, denoting Ergotex's precision in joint angle measurements. These results were statistically significant (p < 0.001), with predominantly trivial to small effect sizes, indicating high accuracy for clinical and biomechanical applications. Bland-Altman analysis showed Limits of Agreement (LoA) approximately ±2.5 degrees across all angles and positions, with overall LoA ranging from 3.6 to -2.4 degrees, reflecting Ergotex's consistent performance. Regression analysis indicated uniform variance across measurements, with minor heteroscedastic errors producing a negligible underestimation trend of around 0.5 degrees in some instances. In conclusion, the Ergotex IMU is a reliable tool for accurate joint angle measurements. It offers a practical and cost-effective alternative to more complex systems, particularly in settings where precise measurement is essential.

Artificial intelligence- and computer-assisted navigation for shoulder surgery.

Background: Over the last few decades, shoulder surgery has undergone rapid advancements, with ongoing exploration and the development of innovative technological approaches. In the coming years, technologies such as robot-assisted surgeries, virtual reality, artificial intelligence, patient-specific instrumentation, and different innovative perioperative and preoperative planning tools will continue to fuel a revolution in the medical field, thereby pushing it toward new frontiers and unprecedented advancements. In relation to this, shoulder surgery will experience significant breakthroughs. Main body: Recent advancements and technological innovations in the field were comprehensively analyzed. We aimed to provide a detailed overview of the current landscape, emphasizing the roles of technologies. Computer-assisted surgery utilizing robotic- or image-guided technologies is widely adopted in various orthopedic specialties. The most advanced components of computer-assisted surgery are navigation and robotic systems, with functions and applications that are continuously expanding. Surgical navigation requires a visual system that presents real-time positional data on surgical instruments or implants in relation to the target bone, displayed on a computer monitor. There are three primary categories of surgical planning that utilize navigation systems. The initial category involves volumetric images, such as ultrasound echogram, computed tomography, and magnetic resonance images. The second type is based on intraoperative fluoroscopic images, and the third type incorporates kinetic information about joints or morphometric data about the target bones acquired intraoperatively. Conclusion: The rapid integration of artificial intelligence and deep learning into the medical domain has a significant and transformative influence. Numerous studies utilizing deep learning-based diagnostics in orthopedics have remarkable achievements and performance.

Comparison study of the MRI shoulder PROPELLER technique with differential image quality by variation of shoulder coils.

INTRODUCTION: Motion and pulsation artifacts are the most prominent types of artifacts in Magnetic Resonance Imaging (MRI) of the shoulder. Therefore, this study examined the Periodically Rotating Overlapping Parallel Lines with Enhanced Reconstruction (PROPELLER) technique with small flex coil (SFC) and dedicated shoulder coil (DSC) for the reduction of motion and pulsation artifacts. The signalto- noise ratio (SNR) and contrast-to-noise ratio (CNR) of the standard proton density fat saturation (PDFS) pulse sequence and the PROPELLER proton density fat saturation (PROPELLER PDFS) pulse sequence were also evaluated. MATERIALS AND METHODS: Eighteen (18) participants who met the inclusion and exclusion criteria were scanned using a standard non-contrast MRI shoulder protocol including the PDFS pulse sequence and the PROPELLER PDFS pulse sequence using a small flex coil and a dedicated shoulder coil. Two experienced musculoskeletal (MSK) radiologists evaluated and graded the presence of artifacts on the MR images and the SNR and CNR were measured quantitatively. RESULTS: The non-parametric Wilcoxon Signed Rank test revealed a significant reduction in motion and pulsation artifacts between the PROPELLER PDFS pulse sequence and the standard PDFS pulse sequence. In addition, the nonparametric Mann-Whitney U test revealed that the mean rank of SNR for the standard sequence was statistically significant when compared to the PROPELLER sequence for both coil types. The CNR of the PROPELLER sequence was statistically significant between fat-fluid, bone-fluid, bonetendon, bone-muscle, and muscle-fluid when using SFC and DSC. CONCLUSION: This study proved that the PROPELLER-PDFS pulse sequence effectively eliminates motion and pulsation artifacts, regardless of the coils utilised. The PROPELLERPDFS pulse sequence can therefore be implemented into the standard MRI shoulder procedure.

The Global Track Concept for Assessment of Engaging Hill-Sachs Defects in Anterior Shoulder Instability.

BACKGROUND: The glenoid track concept is used to determine preoperatively whether a Hill-Sachs defect is engaging or not. Currently, the glenoid track concept relies on measurements of bony structures as well as on the confines and elasticity of the rotator cuff as a reference point, which varies extensively among individuals and therefore limits the reliability and accuracy of this concept. PURPOSE: To evaluate the reliability of the global track concept, which determines the angular distance of the Hill-Sachs defect from the center of the articular surface of the humeral head as a new reference point with the help of an automated image analysis software and 3-dimensional analysis of the humeral head. STUDY DESIGN: Controlled laboratory study. METHODS: Computed tomography scans of 100 patients treated for anterior shoulder instability with different sizes of Hill-Sachs defects were evaluated manually by 2 orthopaedic surgeons independently using the software OsiriX as well as automatically by using a dedicated prototype software (ImFusion). Obtained manual and automated measurements included the Hill-Sachs length, Hill-Sachs width, and Hill-Sachs depth of the defect; the Hill-Sachs interval (HSI); and the glenoid width for the glenoid track concept, as well as the angular distance of the Hill-Sachs defect from the center of the articular surface of the humeral head (global track concept). The reliability of the different measurement techniques was compared by calculating intraclass correlation coefficients (ICCs). RESULTS: There was a significant difference for all obtained parameters comparing manual and automatic measurements. For manually obtained parameters, measurements referring to bony boundaries (glenoid width, Hill-Sachs length, and Hill-Sachs width) showed good to excellent agreement (ICC, 0.86, 0.82, and 0.62, respectively), while measurements referring to soft tissue boundaries (HSI and glenoid track; ICC, 0.56 and 0.53, respectively) or not directly identifiable reference points (center of articular surface and global track) only showed fair reliability (ICC middle excursion, 0.42). When the same parameters were measured with the help of an automated software, good reliability for the glenoid track concept and excellent reliability for the global track concept in the middle excursion were achieved. CONCLUSION: The present study showed that the more complex global track measurements of humeral defects are more reliable than the current standard HSI and glenoid track measurements. However, this is only true when automated software is used to perform the measurements. CLINICAL RELEVANCE: Future studies using the new proposed method in combination with an automated software need to be conducted to determine critical threshold values for defects prone to engagement.